DFAC brand 18000liters firefighting trucks equipped with CB10/60 fire pump

DFAC brand 18000liters firefighting trucks equipped with CB10/60 fire pump

As one of the profession special purpose trucks manufacturer in China, we CEEC TRUCKS INDUSTRY CO., LIMITED can produce different kinds of trucks to satisfy all our customers, mainly as below:

1.    Garbage Compactor Truck

2.    Road Sweeper

3.    Cesspit Emptier

4.    Water Tanker

5.    Combined Jetting Truck

6.    High Pressure Jetting

7.    Roll on Roll off Truck

8.    Skip Refuse Truck

9.    Garbage Dumper

10. Truck Mounted Crane

11. Garbage Stations

12. All-Wheel-Drive Trucks

Also we company can produce different capacity firefighting trucks which range from minimum 500liters to maximum22000liters capacity; with fire pump from 500gallon to 5000gallon, all depend on customers request.

Technical parameter for CEEC produced 18000liters fire fighting trucks:

Dongfeng tianlong 18,000L fire truck
Truck model	Dongfeng tianlong 18,000L fire truck		Truck model	CEEC5250GXF
Weight mass(kg)	Total mass(kg)	25000	Overall dimension(mm)	9980×2500×3690
	Rated mass(kg)	14000	Tanker volume(m3)	18
	Curb mass(kg)	10805	Wheelbase (mm)	4350+1300
Engine	Model	CUMMINS	Emission standard	Euro 3/4
	power/displacement	（kw/ml）	180/6700	Manufacturer	Dongfeng company
Main parameters	Max speed(km/h)	90	tread(mm)	Front	1986
	Seating person	2/3		Rear	1860
	Steel spring	8/9	Suspension	Front suspension	1460mm
	Tyre nos.	10		Rear suspension	2790mm
	Tyre specification	11.00R20	Driving angle(°)	Approach angle	20
	Axle nos.	4		Departure angle	14
Special function	Water tanker volume（L）	The water tanker volume is 18,000L, up to 20,000L
	Fire fighting moniter	model：PS50,flow: 50L/S/1MPa, water range：≥50m
	Fire fighting pump	1. common pressure fire pump mode: CB10/60 truck mounted，flow:60L/s; pressure：1.0MPa 2. time sucking time≤35s（7m sucking height, water ring sucking water, Sandwich full power PTO.
Remark	Dongfeng tianlong 6*4 fire fighting truck, adopts Dongfeng tianlong 6*4 original chassis, and the taner with out-built type, with high quality 4mm thickness Q235A carbon marerial. all-steel forward control, 55º hydraulic tilt to the front, 2- arm windscreen wiper system with three speeds, laminated windscreen with casted-in radio aerial, hydraulically damped adjustable driver’s seat and rigid adjustable co-driver’s seat, with heating and ventilating system, outer sun visor, adjustable roof flap, with stereo radio/cassette recorder, safety belts and adjustable steering wheel, air horn, with 4-point support fully floating suspension and shock absorbers