Technique Parameters
Model
|
FORLAND 113HP 4X2 Compactor Garbage Truck
|
|||
Driving Model
|
4X2
|
|||
Vehicle Main
Dimensions
|
(L x W x H)mm
|
6400x2099x2430
|
||
Wheel base (mm)
|
3360
|
|||
Wheel track (front/rear) (mm)
|
1180/1870
|
|||
Approach/Departure angle(°)
|
16/10
|
|||
Weight in KGS
|
Tare Weight
|
7900
|
||
Loading Capacity
|
7490
|
|||
Max. driving speed(km/h)
|
80
|
|||
Engine
|
Brand
|
Forland
|
||
Model
|
YZ4DA2-40
|
|||
Type
|
4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling
|
|||
Horse Power
|
113(HP)
|
|||
Emission standard
|
Euro Ⅲ
|
|||
Max. Output Power
|
83kw
|
|||
Gearbox
|
5 forwards& 1 reverse
|
|||
Clutch
|
Reinforced diaphragm clutch, diameter 430mm
|
|||
Tire
|
8.25R16 All steel radial tire, 1pc including 1 spare tire
|
|||
Brakes
|
Service
brake: dual circuit compressed air
brake
Parking brake:(emergency brake): spring energy, compressed air
operating on rear wheels Auxiliary brake: engine exhaust valve brake
|
|||
Steering Gear
|
power steering, hydraulic steering with power assistance
|
|||
Body
|
||||
Volume(M3)
|
6CBM
|
|||
Material
|
Q235/Q345/610L/Q700 carbon steel, stainless steel, alloy steeel
|
|||
Equipment
|
Hermetic dustbin, hydraulic system and operating system
|
|||
Thickness
|
4mm 6mm 10mm
|
|||
Uploding cycling time
|
<60s
|
|||
Loading cycling time
|
≤30s
|
|||
Lifting capacity of turnover machanism
|
≥800KG
|
|||
Professional CAD CAE R&D
Different Kinds of Garbage Truck
- Roll off garbage truck---- Widely used to collect the loads of construction and demolition waste, one truck available with several roll-off containers, easy to raise the container with hydraulic system.
- Dump garbage truck---- Widely used to dispose loads of construction and demolition waste, easy to dump the waste with hydraulic system.
- Docking garbage truck---- Used to transfer and dispose the compressed waste of the urban area. The operation system can be controlled by the hydraulics manually or electrically. After the garbage is compressed at the station, the garbage container is lifted upwards and open its door. At the same time, the truck opens its rear door of the garbage body. Then the two doors are docked and the waste is pushed from the container of the station into the garbage body of the truck. After that, the truck can transfer the waste and dispose it. It is the most common way of waste disposal in China presently. One truck can be shared by several garbage stations, which reduces the equipment cost and space. All of the operation systems are driven by the truck engines through the hydraulics.
- Arm-roll garbage truck---It is made up of chassis, garbage body, hydro-cylinder,etc. The hydro-cylinder is used to speed down the rolling arm; the truck can be separated from the garbage tank and shared by several tanks.
- Hydraulic lifter garbage truck----The garbage tank of the truck can be lifted upwards and turned over by the chains and the hydraulic hydro-cylinder. By this way, it can collect the garbage at different places into the tank and dump them out at one time.
More products
1. LPG Tank Truck Trailer/ Fuel Tanker Truck
2. Water truck / Water Tank Truck / Water Sprinkler Truck/Water Tanker
3. Truck with crane / Truck mounted crane
4. Dump Truck / Tipper Truck/Side Tipper/End Tipper
5. Fire Fighting Truck / Fire Truck / Fire Vehicle
6. Concrete Mixer Truck
7. Van truck / Blasting equipment transporter/ Refrigerated truck
8. Fecal suction truck / Sewage suction truck,
9. Cement Powder Tank truck/ Bulk cement truck
10. High-altitude operation truck,
11. Self-loading garbage truck, garbage compactor truck,sealed garbage truc
12. Tractor
13. High Pressure Cleaning Truck
14. Sweeper Truck
15. Semi Trailer ( flat bed trailer / skeleton trailer / dump semi trailer / side wall trailer / low bed trailer /
van container trailer / warehouse trailer, etc. )
没有评论:
发表评论